Ergebnis 1 bis 15 von 47
-
08.08.2010, 18:07 #1./bin dabei ./guest86
- Registriert seit
- 08.08.2010
- Ort
- localhost
- Beiträge
- 32
- Thanks
- 0
- Thanked 0 Times in 0 Posts
Mein AMD und meine Probleme...
Hy Folks von root86,
Scheint ein tolles Board zum Thema Hackintosh zu sein... Doch leider habe ich auch bei euch noch keine Loesung zu meinem Problem gefunden...
Also fange ich mal an mein Problem zu schildern... ^^
Meine Config:
Board: Asus M2N32-SLI Deluxe (aktuellstes BIOS | no BETA)
CPU: AMD Athlon X2 5600+ @ 2x 2,8GHz
Ram: 4GB Corsair DDR2 mit 800MHz FSB
GraKa: Asus GeForce 8600 GT mit 512MB (DVI out | HDMI out | S-Video out)
GraKa Option 2: XFX GeForce 8800 GT mit 512MB (Dual DVI out & S-Video out)
HDD: 2x SATA2 von Samsung mit jeweils 160GB
Maus & Tastatur: USB
Probierte Distro's:
******* 10.5.2 (nur VESA Mode)
iPC 10.5.6 (nur VESA Mode)
****** 1.4 (nur VESA Mode)
iAktos v.7 (bricht bei Installation zusammen, also failed)
verschiedene 10.6 Distros (bricht mit JAVA Error bei Install ab)
Mein Problem:
Ich kann soweit alle 10.5.x Versionen installieren... Sound, Lan, W-Lan usw bekomme ich Problemlos zum laufen (lang genug probiert bis der richtige Kext gesessen hat).
Doch sobald ich die Grafikkarte installiere und der GraKa einen Kext zuweise oder den EFI String setze, dann kann ich OSX nicht mehr mit der Maus bedienen... -.-
Ich kann die Maus immer nur kurz bewegen, und dannach muss ich dann entweder Fenster oeffnen um wieder fuer ein paar Sekunden die Maus zu nutzen, oder mich per Tastatur durch die GUI hangeln...
Stelle ich dann wieder auf VESA, kann ich OSX fast fehlerfrei nutzen und steuern. Wenn ich im VESA Mode ein Fenster schiebe oder im Fenster scollen will. So stimmt der Zeilenumsprung nicht mehr und man kann nix mehr lesen...
Ich hab verschiedene Modis probiert.
Per EFI werden beide Grafikkarten erkannt... Nur die Maus hakt voll....
Hatte zuerst die 8800GT am laufen... Doch damit fingen die Probleme an... ^^ Auf Rat von einem Kollegen legte ich mir eine andere GraKa zu.... (die 8600 GT mit 512MB von Asus)
Doch da ist genau das gleiche Problem wie mit der 8800GT...
Habt ihr ne Idee woran es noch haengen kann?
Hab sogar schon den SMBIOS Kext bei der Install weg gelassen, doch dies brachte auch keinen anderen Effekt... Auch hatte ich die 8800GT mit einem Apple-BIOS gepacht... Doch auch keine Besserung... ^^
Auch ein AMD Timing Patch brachte keinen Erfolg....
Ich verzweifel noch wegen dem Ding... ^^
Habe schon in einigen Boards gelesen das diese Hardware Kombination laufen sollte und auch bei einigen Usern im WWW laeuft... Aber bei mir wills einfach nicht...
Please Help me...
GreeZ iSp33dy MacBook Pro 15" late '08 ~ OS X 10.5.8 / Win 7 x64 Ultimate - 2x 2,4 Ghz - 4 GB Ram - 500 GB HDD
ASUS M2N32-SLI Deluxe | AMD 5600+ X2 | GF8600GT ~ OSx86 10.6.2 Retail - 2x 2,8 Ghz - 4 GB Ram - 320 GB
iPhone 3GS ~ v.4.2.1 Jailbreak- 32GB
-
08.08.2010, 18:17 #2./Gehirnchirurg86 ./Bruderschaft86
./root86club
./SysOp
./Dominus86
- Registriert seit
- 14.05.2009
- Ort
- Strychnin
- Beiträge
- 7.001
- Blog-Einträge
- 1
- Thanks
- 26
- Thanked 50 Times in 41 Posts
AW: Mein AMD und meine Probleme...
such mal nach disabler.kext
eventuell hilft das ja bei deinem maus problem.
falls nicht, wenn du eine usb maus nutzt, dann mal ps2 probieren.
wenn du ps2 nutzt, mal usb nehmen.Geändert von Stefe Hobs (08.08.2010 um 18:22 Uhr)
-
08.08.2010, 18:24 #3./bin dabei ./guest86
- Registriert seit
- 08.08.2010
- Ort
- localhost
- Beiträge
- 32
- Thanks
- 0
- Thanked 0 Times in 0 Posts
AW: Mein AMD und meine Probleme...
Hui... das ging fix...

Also die disabler.kext bringt keinen Erfolg... Haette ich vielleicht noch oben dazu schreiben sollen...
PS2 bekomm ich gar nicht angesprochen... Weder Maus, noch Tastatur... Dies waren die ersten Anlaufschwierigkeiten bei diesem Hackintosh... Deshalb hab ich ne USB Maus & Tastatur angeschlossen...
Also PS2 Kext laufen nicht...
Hab dann einfach keine Maus und keine Tastatur...
Bei USB laeuft beides... Nur sobald ich die GraKa zuweise, dann hab ich diese extremen Maus Lags...
MacBook Pro 15" late '08 ~ OS X 10.5.8 / Win 7 x64 Ultimate - 2x 2,4 Ghz - 4 GB Ram - 500 GB HDD
ASUS M2N32-SLI Deluxe | AMD 5600+ X2 | GF8600GT ~ OSx86 10.6.2 Retail - 2x 2,8 Ghz - 4 GB Ram - 320 GB
iPhone 3GS ~ v.4.2.1 Jailbreak- 32GB
-
08.08.2010, 18:26 #4Super-Moderator ./Bruderschaft86
./root86club
./SuperModerator86
./Ausbilder86
- Registriert seit
- 31.07.2009
- Ort
- Wie immer, hier
- Alter
- 28
- Beiträge
- 2.805
- Blog-Einträge
- 1
- Thanks
- 1
- Thanked 10 Times in 7 Posts
AW: Mein AMD und meine Probleme...
Ah ist dieser QT, Carbon und GF8 Problem schon wieder.
Woppy?PowerBook G4 15" PowerBook5,4iBook G4 12" PowerBook6,5
-
08.08.2010, 18:28 #5./bin dabei ./guest86
- Registriert seit
- 08.08.2010
- Ort
- localhost
- Beiträge
- 32
- Thanks
- 0
- Thanked 0 Times in 0 Posts
AW: Mein AMD und meine Probleme...
MacBook Pro 15" late '08 ~ OS X 10.5.8 / Win 7 x64 Ultimate - 2x 2,4 Ghz - 4 GB Ram - 500 GB HDD
ASUS M2N32-SLI Deluxe | AMD 5600+ X2 | GF8600GT ~ OSx86 10.6.2 Retail - 2x 2,8 Ghz - 4 GB Ram - 320 GB
iPhone 3GS ~ v.4.2.1 Jailbreak- 32GB
-
08.08.2010, 18:30 #6Super-Moderator ./Bruderschaft86
./root86club
./SuperModerator86
./Ausbilder86
- Registriert seit
- 31.07.2009
- Ort
- Wie immer, hier
- Alter
- 28
- Beiträge
- 2.805
- Blog-Einträge
- 1
- Thanks
- 1
- Thanked 10 Times in 7 Posts
AW: Mein AMD und meine Probleme...
AppleUpstreamUserClient.kext gelöscht?
PowerBook G4 15" PowerBook5,4iBook G4 12" PowerBook6,5
-
08.08.2010, 18:33 #7./bin dabei ./guest86
- Registriert seit
- 08.08.2010
- Ort
- localhost
- Beiträge
- 32
- Thanks
- 0
- Thanked 0 Times in 0 Posts
AW: Mein AMD und meine Probleme...
Ne dies noch nicht.... Ich werds grad mal probieren und ggf einen Edit machen....
Tante Edit sagt: Leider hat dies auch keinen Erfolg gebracht...
Geändert von iSp33dy (08.08.2010 um 18:50 Uhr)
MacBook Pro 15" late '08 ~ OS X 10.5.8 / Win 7 x64 Ultimate - 2x 2,4 Ghz - 4 GB Ram - 500 GB HDD
ASUS M2N32-SLI Deluxe | AMD 5600+ X2 | GF8600GT ~ OSx86 10.6.2 Retail - 2x 2,8 Ghz - 4 GB Ram - 320 GB
iPhone 3GS ~ v.4.2.1 Jailbreak- 32GB
-
08.08.2010, 18:50 #8./bin dabei ./guest86
- Registriert seit
- 08.08.2010
- Ort
- localhost
- Beiträge
- 32
- Thanks
- 0
- Thanked 0 Times in 0 Posts
AW: Mein AMD und meine Probleme...
Hab die AppleUpstreamUserClient.kext geloescht und den EFI String gesetzt....
Doch leider genau das gleiche Problem... Die maus laesst sich einfach nicht bedienen... Es lagt und hakt wie gehabt... Per Tastatur laesst sich jedoch die komplette GUI steuern...
Nun muss ich wieder im VESA Mode booten damit ich des Dingen bedienen kann ^^ MacBook Pro 15" late '08 ~ OS X 10.5.8 / Win 7 x64 Ultimate - 2x 2,4 Ghz - 4 GB Ram - 500 GB HDD
ASUS M2N32-SLI Deluxe | AMD 5600+ X2 | GF8600GT ~ OSx86 10.6.2 Retail - 2x 2,8 Ghz - 4 GB Ram - 320 GB
iPhone 3GS ~ v.4.2.1 Jailbreak- 32GB
-
08.08.2010, 18:55 #9Super-Moderator ./Bruderschaft86
./root86club
./SuperModerator86
./Ausbilder86
- Registriert seit
- 31.07.2009
- Ort
- Wie immer, hier
- Alter
- 28
- Beiträge
- 2.805
- Blog-Einträge
- 1
- Thanks
- 1
- Thanked 10 Times in 7 Posts
AW: Mein AMD und meine Probleme...
Mit älterem QuickTime probiert?
PowerBook G4 15" PowerBook5,4iBook G4 12" PowerBook6,5
-
08.08.2010, 18:58 #10./bin dabei ./guest86
- Registriert seit
- 08.08.2010
- Ort
- localhost
- Beiträge
- 32
- Thanks
- 0
- Thanked 0 Times in 0 Posts
AW: Mein AMD und meine Probleme...
japp... ^^ jedoch auch ohne aenderung...
Nen guter Kollege hat sich da auch knappe 2 Wochen die Zaehne online ausgebissen um des Ding ans laufen zu bekommen... Doch jedesmal bleiben wir bei diesem Problem haengen...
Bin kurz davor des Ding bei eBay zu verscherbeln und mir anschliessend nen Intel zu kaufen ^^ MacBook Pro 15" late '08 ~ OS X 10.5.8 / Win 7 x64 Ultimate - 2x 2,4 Ghz - 4 GB Ram - 500 GB HDD
ASUS M2N32-SLI Deluxe | AMD 5600+ X2 | GF8600GT ~ OSx86 10.6.2 Retail - 2x 2,8 Ghz - 4 GB Ram - 320 GB
iPhone 3GS ~ v.4.2.1 Jailbreak- 32GB
-
08.08.2010, 18:59 #11Super-Moderator ./Bruderschaft86
./root86club
./SuperModerator86
./Ausbilder86
- Registriert seit
- 31.07.2009
- Ort
- Wie immer, hier
- Alter
- 28
- Beiträge
- 2.805
- Blog-Einträge
- 1
- Thanks
- 1
- Thanked 10 Times in 7 Posts
AW: Mein AMD und meine Probleme...
Als was wird dein PC erkannt in System Profiler?
PowerBook G4 15" PowerBook5,4iBook G4 12" PowerBook6,5
-
08.08.2010, 19:07 #12./bin dabei ./guest86
- Registriert seit
- 08.08.2010
- Ort
- localhost
- Beiträge
- 32
- Thanks
- 0
- Thanked 0 Times in 0 Posts
AW: Mein AMD und meine Probleme...
Was magst du genau wissen??
Als Prozessor erkennt er nen 3,7Ghz Intel CPU....
Ram erkennt er normal... ^^ 4GB 800Mhz
Startvol. ist Hackintosh
oder welche Details magst du gerne haben??? MacBook Pro 15" late '08 ~ OS X 10.5.8 / Win 7 x64 Ultimate - 2x 2,4 Ghz - 4 GB Ram - 500 GB HDD
ASUS M2N32-SLI Deluxe | AMD 5600+ X2 | GF8600GT ~ OSx86 10.6.2 Retail - 2x 2,8 Ghz - 4 GB Ram - 320 GB
iPhone 3GS ~ v.4.2.1 Jailbreak- 32GB
-
08.08.2010, 19:10 #13Super-Moderator ./Bruderschaft86
./root86club
./SuperModerator86
./Ausbilder86
- Registriert seit
- 31.07.2009
- Ort
- Wie immer, hier
- Alter
- 28
- Beiträge
- 2.805
- Blog-Einträge
- 1
- Thanks
- 1
- Thanked 10 Times in 7 Posts
AW: Mein AMD und meine Probleme...
Model Name
Model Identifier
Poste kextstat und dmesgPowerBook G4 15" PowerBook5,4iBook G4 12" PowerBook6,5
-
08.08.2010, 19:33 #14./bin dabei ./guest86
- Registriert seit
- 08.08.2010
- Ort
- localhost
- Beiträge
- 32
- Thanks
- 0
- Thanked 0 Times in 0 Posts
AW: Mein AMD und meine Probleme...
Kextstat:
Fortsetzung folgt....:Index Refs Address Size Wired Name (Version) <Linked Against>
1 1 0x0 0x0 0x0 com.apple.kernel (9.5.0)
2 31 0x0 0x0 0x0 com.apple.kpi.bsd (9.5.0)
3 3 0x0 0x0 0x0 com.apple.kpi.dsep (9.5.0)
4 45 0x0 0x0 0x0 com.apple.kpi.iokit (9.5.0)
5 47 0x0 0x0 0x0 com.apple.kpi.libkern (9.5.0)
6 41 0x0 0x0 0x0 com.apple.kpi.mach (9.5.0)
7 22 0x0 0x0 0x0 com.apple.kpi.unsupported (9.5.0)
8 1 0x0 0x0 0x0 com.apple.iokit.IONVRAMFamily (9.5.0)
9 1 0x0 0x0 0x0 com.apple.driver.AppleNMI (9.5.0)
10 1 0x0 0x0 0x0 com.apple.iokit.IOSystemManagementFamily (9.5.0)
11 1 0x0 0x0 0x0 com.apple.iokit.ApplePlatformFamily (9.5.0)
12 15 0x0 0x0 0x0 com.apple.kernel.6.0 (7.9.9)
13 1 0x0 0x0 0x0 com.apple.kernel.bsd (7.9.9)
14 1 0x0 0x0 0x0 com.apple.kernel.iokit (7.9.9)
15 1 0x0 0x0 0x0 com.apple.kernel.libkern (7.9.9)
16 1 0x0 0x0 0x0 com.apple.kernel.mach (7.9.9)
17 13 0x54b35000 0x10000 0xf000 com.apple.iokit.IOPCIFamily (2.5) <7 6 5 4>
18 7 0x54b4b000 0x4000 0x3000 com.apple.iokit.IOACPIFamily (1.2.0) <12>
19 2 0x54b9a000 0x3e000 0x3d000 com.apple.driver.AppleACPIPlatform (1.2.4) <18 17 12 7 5 4>
21 0 0x54c11000 0x2000 0x1000 net.osrom.kext.Disabler (1.0.1) <12>
22 0 0x54c43000 0x3000 0x2000 com.apple.driver.decrypt (2.0.3) <7 5 4>
23 0 0x54c5d000 0x5000 0x4000 com.apple.BootCache (30.3) <7 6 5 4 2>
24 2 0x54d24000 0x39000 0x38000 com.apple.iokit.IOHIDFamily (1.5.3) <7 6 5 4 2>
25 0 0x54d95000 0x3000 0x2000 com.apple.security.TMSafetyNet (3) <7 6 5 3 2>
26 0 0x54daf000 0x8000 0x7000 com.apple.nke.applicationfirewall (1.0.77) <7 6 5 4 2>
27 0 0x55e00000 0x18000 0x17000 com.apple.security.seatbelt (107.10) <7 6 5 3 2>
28 0 0x5a97d000 0x3000 0x2000 com.apple.driver.AppleAPIC (1.4) <5 4>
29 0 0x5a990000 0x4000 0x3000 com.apple.driver.AppleSMBIOS (1.1.1) <7 5 4>
30 0 0x5aaf4000 0x4000 0x3000 com.apple.driver.AppleACPIButtons (1.2.4) <24 19 18 7 6 5 4 2>
31 0 0x5ab9f000 0x3000 0x2000 com.apple.driver.AppleACPIPCI (1.2.4) <19 18 17 12>
32 0 0x5ac18000 0x5000 0x4000 com.apple.driver.AppleRTC (1.2.3) <18 6 5 4 2>
34 3 0x5acd4000 0xd000 0xc000 com.apple.iokit.IOATAFamily (2.0.0) <6 5 4 2>
35 0 0x5adb5000 0x9000 0x8000 com.nvidia.driver.AppleNForceATA (1.0.3) <34 17 12>
36 6 0x5ae74000 0x29000 0x28000 com.apple.iokit.IOUSBFamily (3.2.7) <7 6 5 4 2>
37 0 0x5aed3000 0x12000 0x11000 com.apple.driver.AppleUSBEHCI (3.2.5) <36 17 7 6 5 4>
38 0 0x5af69000 0xb000 0xa000 com.apple.driver.AppleUSBOHCI (3.2.7) <36 17 6 5 4>
39 0 0x5afc3000 0x2000 0x1000 com.apple.iokit.IOUSBUserClient (3.2.4) <36 6 5 4>
40 0 0x5b02e000 0xc000 0xb000 com.apple.driver.AppleUSBHub (3.2.7) <36 6 5 4>
41 9 0x5b140000 0x18000 0x17000 com.apple.iokit.IOStorageFamily (1.5.5) <7 6 5 4 2>
43 4 0x5b1fb000 0x19000 0x18000 com.apple.iokit.IOSCSIArchitectureModelFamily (2.0.5) <6 5 4 2>
44 0 0x5b236000 0x4000 0x3000 com.apple.iokit.IOATAPIProtocolTransport (1.5.2) <43 34 12>
45 0 0x5b2bc000 0xe000 0xd000 com.apple.iokit.IOATABlockStorage (2.0.5) <41 34 6 5 4 2>
46 0 0x5b34a000 0x5000 0x4000 com.apple.driver.XsanFilter (2.7.91) <41 12>
47 0 0x5b3fa000 0x6000 0x5000 com.apple.iokit.SCSITaskUserClient (2.0.5) <43 41 6 5 4 2>
48 3 0x5b4d6000 0x8000 0x7000 com.apple.iokit.IOCDStorageFamily (1.5) <41 6 5 4 2>
49 2 0x5b516000 0x6000 0x5000 com.apple.iokit.IODVDStorageFamily (1.5) <48 41 6 5 4 2>
50 1 0x5b543000 0x16000 0x15000 com.apple.iokit.IOSCSIBlockCommandsDevice (2.0.5) <43 41 6 5 4 2>
51 1 0x5b567000 0x5000 0x4000 com.apple.iokit.IOBDStorageFamily (1.5) <49 48 41 6 5 4 2>
52 0 0x5b594000 0x16000 0x15000 com.apple.iokit.IOSCSIMultimediaCommandsDevice (2.0.5) <51 50 49 48 43 41 6 5 4 2>
53 0 0x5b5fd000 0x4000 0x3000 com.apple.driver.AppleUSBComposite (3.2.0) <36 5 4>
54 0 0x5b6b7000 0x5000 0x4000 com.apple.iokit.IOUSBHIDDriver (3.2.2) <36 24 6 5 4>
55 3 0x54aad000 0x1d000 0x1c000 com.apple.iokit.IOGraphicsFamily (1.7.1) <17 7 6 5 4>
56 2 0x54aca000 0xe000 0xd000 com.apple.iokit.IONDRVSupport (1.7.1) <55 17 7 6 5 4>
57 2 0x636b6000 0x25d000 0x25c000 com.apple.NVDAResman (5.3.6) <56 55 17 6 5 4 2>
58 0 0x5b400000 0x98000 0x97000 com.apple.GeForce (5.3.6) <57 56 55 17 12 6 5 4 2>
59 0 0x63913000 0x255000 0x254000 com.apple.nvidia.nv50hal (5.3.6) <57 5 4>
60 1 0x54adc000 0x9000 0x8000 com.apple.driver.AppleSMC (2.2.0d4) <18 7 6 5 4>
61 1 0x54ae5000 0xe000 0xd000 com.apple.driver.IOPlatformPluginFamily (3.3.1d0) <12 4>
62 0 0x54c31000 0xf000 0xe000 com.apple.driver.ACPI_SMC_PlatformPlugin (3.3.1d0) <61 60 18 17 12 7 6 5 4>
63 1 0x54c46000 0x9000 0x8000 com.apple.iokit.IOSerialFamily (9.3) <7 6 5 4 2>
64 1 0x54c62000 0x9000 0x8000 com.apple.driver.Apple16X50Serial (1.9) <63 17 12>
65 0 0x54a19000 0x2000 0x1000 com.apple.driver.Apple16X50ACPI (1.9) <64 18 12>
66 1 0x54af3000 0x3000 0x2000 com.apple.kext.OSvKernDSPLib (1.1) <6 5>
67 2 0x54c6b000 0x17000 0x16000 com.apple.iokit.IOAudioFamily (1.6.5fc3) <66 6 5 4 2>
68 0 0x54bd8000 0x4000 0x3000 com.apple.driver.AudioIPCDriver (1.0.5) <67 6 5 4 2>
69 0 0x54c82000 0x10000 0xf000 com.apple.driver.DiskImages (195.2.2) <41 7 6 5 4 2>
70 2 0x54c4f000 0x6000 0x5000 com.apple.iokit.IOHDAFamily (1.2.4a21) <6 5 4 2>
71 0 0x54c92000 0x7000 0x6000 com.apple.driver.AppleHDAController (1.2.4a21) <70 17 6 5 4 2>
72 1 0x54c99000 0x16000 0x15000 com.apple.iokit.IONetworkingFamily (1.6.1) <7 6 5 4 2>
73 0 0x54caf000 0xd000 0xc000 com.nvidia.driver.nForceLAN (0.62.8) <72 17 12 2>
75 0 0x54bdc000 0x3000 0x2000 com.x86dev.driver.lspcidrv (1.0) <12>
76 0 0x5adbe000 0x52000 0x51000 com.apple.driver.AppleHDA (1.2.4a21) <70 67 6 5 4 2>
77 0 0x5b6ce000 0xb000 0xa000 com.apple.filesystems.autofs (2.0.1) <7 6 5 4 2> MacBook Pro 15" late '08 ~ OS X 10.5.8 / Win 7 x64 Ultimate - 2x 2,4 Ghz - 4 GB Ram - 500 GB HDD
ASUS M2N32-SLI Deluxe | AMD 5600+ X2 | GF8600GT ~ OSx86 10.6.2 Retail - 2x 2,8 Ghz - 4 GB Ram - 320 GB
iPhone 3GS ~ v.4.2.1 Jailbreak- 32GB
-
08.08.2010, 19:33 #15./bin dabei ./guest86
- Registriert seit
- 08.08.2010
- Ort
- localhost
- Beiträge
- 32
- Thanks
- 0
- Thanked 0 Times in 0 Posts
AW: Mein AMD und meine Probleme...
dmesg:
Was du mit Model Name & Identifier meinst raff ich grad nich... ^^ Da er Intel Mac anzeigt und nicht das was es ist.. ^^npvhash=4095
hi mem tramps at 0xffe00000
PAE enabled
rtclock_init: Taking bus ratio path 1 (AMD Athlon)
TSC: Verification of clock speed PASSED.
TSC: Frequency = 2812.795119MHz, FSB frequency = 200.913937MHz, bus ratio = 14
Darwin Kernel Version 9.5.0: Sat Dec 6 19:39:54 IST 2008; Voodoo; Release 1.0 :xnu-1228.7.58/BUILD/obj/RELEASE_I386
standard timeslicing quantum is 10000 us
vm_page_bootstrap: 974324 free pages and 74252 wired pages
mig_table_max_displ = 79
AMD: disabling C1 clock ramping (node 0)
Local APIC version not 0x14 as expected
warning: skipping personalities in blacklisted kext com.apple.driver.AppleIntelCPUPowerManagement
IOResources: not registry member at registerService()
AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
AppleACPICPU: ProcessorApicId=2 LocalApicId=2 Disabled
AppleACPICPU: ProcessorApicId=3 LocalApicId=3 Disabled
Loading security extension com.apple.security.TMSafetyNet
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Loading security extension com.apple.nke.applicationfirewall
Loading security extension com.apple.security.seatbelt
calling mpo_policy_init for mb
Seatbelt MACF policy initialized
Security policy loaded: Seatbelt Policy (mb)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
MAC Framework successfully initialized
using 16384 buffer headers and 4096 cluster IO buffer headers
[TSC] original delta: -282949, new delta: 58. (CPU1)
IOAPIC: Version 0x11 Vectors 64:87
ACPI: System State [S0 S3 S4 S5] (S3)
mbinit: done
Security auditing service present
BSM auditing present
AppleNForceATARoot::createATAChannels() [this=0x65dcf00] created channel 0 in legacy mode.
AppleNForceATARoot::createATAChannels() [this=0x65dcf00] created channel 1 in legacy mode.
AppleNForceATA: start( 0x65fee00, 0x65dcf80 )
AppleNForceATA::getBMBaseAddress( 0x65fee00, 0, 0x65fef1e )
AppleNForceATA: BMBaseAddr = fd00
AppleNForceATA::resetBusTimings( 0x65fee00 )
PCI_IDE_ENABLE 0x02
PCI_IDE_CONFIG 0x00
PCI_FIFO_CONFIG 0x00
PCI_ULTRA_TIMING 0xc0c00000
AppleNForceATA::configureTFPointers( 0x65fee00 )
AppleNForceATA: start( 0x65fec00, 0x65d5000 )
AppleNForceATA::getBMBaseAddress( 0x65fec00, 1, 0x65fed1e )
AppleNForceATA: BMBaseAddr = fd08
AppleNForceATA::resetBusTimings( 0x65fec00 )
PCI_IDE_ENABLE 0x02
PCI_IDE_CONFIG 0x00
PCI_FIFO_CONFIG 0x00
PCI_ULTRA_TIMING 0xc0c00000
AppleNForceATA::configureTFPointers( 0x65fec00 )
AppleNForceATARoot::createATAChannels() [this=0x6601e00] created channel 0 in native mode.
AppleNForceATARoot::createATAChannels() [this=0x6601e00] created channel 1 in native mode.
AppleNForceATA: start( 0x6600c00, 0x65dc880 )
AppleNForceATA::getBMBaseAddress( 0x6600c00, 0, 0x6600d1e )
AppleNForceATA: BMBaseAddr = ee00
AppleNForceATA::initializeHardware mapped memory at 0x5af74000
AppleNForceATA::resetBusTimings( 0x6600c00 )
PCI_IDE_ENABLE 0x0f
PCI_IDE_CONFIG 0x68
PCI_FIFO_CONFIG 0x80
PCI_ULTRA_TIMING 0x00000000
AppleNForceATA::configureTFPointers( 0x6600c00 )
AppleNForceATA: start( 0x6600e00, 0x6601e80 )
AppleNForceATA::getBMBaseAddress( 0x6600e00, 1, 0x6600f1e )
AppleNForceATA: BMBaseAddr = ee08
AppleNForceATA::initializeHardware mapped memory at 0x5af74000
AppleNForceATA::resetBusTimings( 0x6600e00 )
PCI_IDE_ENABLE 0x0f
PCI_IDE_CONFIG 0x68
PCI_FIFO_CONFIG 0x80
PCI_ULTRA_TIMING 0x00000000
AppleNForceATA::configureTFPointers( 0x6600e00 )
AppleNForceATARoot::createATAChannels() [this=0x6618f80] created channel 0 in native mode.
AppleNForceATARoot::createATAChannels() [this=0x6618f80] created channel 1 in native mode.
AppleNForceATA: start( 0x6600600, 0x6618f00 )
AppleNForceATA::getBMBaseAddress( 0x6600600, 0, 0x660071e )
AppleNForceATA: BMBaseAddr = f300
AppleNForceATA::initializeHardware mapped memory at 0x5b03a000
AppleNForceATA::resetBusTimings( 0x6600600 )
PCI_IDE_ENABLE 0x0f
PCI_IDE_CONFIG 0x68
PCI_FIFO_CONFIG 0x80
PCI_ULTRA_TIMING 0x00000000
AppleNForceATA::configureTFPointers( 0x6600600 )
AppleNForceATA: start( 0x6600400, 0x6618e80 )
AppleNForceATA::getBMBaseAddress( 0x6600400, 1, 0x660051e )
AppleNForceATA: BMBaseAddr = f308
AppleNForceATA::initializeHardware mapped memory at 0x5b03a000
AppleNForceATA::resetBusTimings( 0x6600400 )
PCI_IDE_ENABLE 0x0f
PCI_IDE_CONFIG 0x68
PCI_FIFO_CONFIG 0x80
PCI_ULTRA_TIMING 0x00000000
AppleNForceATA::configureTFPointers( 0x6600400 )
AppleNForceATARoot::createATAChannels() [this=0x6618a80] created channel 0 in native mode.
AppleNForceATARoot::createATAChannels() [this=0x6618a80] created channel 1 in native mode.
AppleNForceATA: start( 0x6625c00, 0x6618980 )
AppleNForceATA::getBMBaseAddress( 0x6625c00, 0, 0x6625d1e )
AppleNForceATA: BMBaseAddr = f800
AppleNForceATA::initializeHardware mapped memory at 0x5b049000
AppleNForceATA::resetBusTimings( 0x6625c00 )
PCI_IDE_ENABLE 0x0f
PCI_IDE_CONFIG 0x68
PCI_FIFO_CONFIG 0x80
PCI_ULTRA_TIMING 0x00000000
AppleNForceATA::configureTFPointers( 0x6625c00 )
AppleNForceATA: sata phy reset done.
AppleNForceATA: start( 0x6625a00, 0x6618900 )
AppleNForceATA::getBMBaseAddress( 0x6625a00, 1, 0x6625b1e )
AppleNForceATA: BMBaseAddr = f808
AppleNForceATA::initializeHardware mapped memory at 0x5b049000
AppleNForceATA::resetBusTimings( 0x6625a00 )
PCI_IDE_ENABLE 0x0f
PCI_IDE_CONFIG 0x68
PCI_FIFO_CONFIG 0x80
PCI_ULTRA_TIMING 0x00000000
AppleNForceATA::configureTFPointers( 0x6625a00 )
AppleNForceATA: found 2 units.
AppleNForceATA: found 1 units.
From path: "uuid",
Waiting for boot volume with UUID EBD603D1-FFA6-3CD5-BA78-047CB0707628
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
AppleNForceATA::provideBusInfo( 0x65fee00, 0x66276e0 )
AppleNForceATA::provideBusInfo( 0x65fee00, 0x6627300 )
AppleNForceATA: NVIDIA nForce MCP 55 by MeDevil (CMD 0x1f0, CTR 0x3f4, IRQ 14, BM 0xfd00)
AppleNForceATA::provideBusInfo( 0x6625c00, 0x658b200 )
AppleNForceATA: NVIDIA nForce MCP 55 Serial ATA by MeDevil (CMD 0x9f0, CTR 0xbf0, IRQ 23, BM 0xf800)
AppleNForceATA::provideBusInfo( 0x65fee00, 0x663e580 )
AppleNForceATA::provideBusInfo( 0x65fee00, 0x663e420 )
AppleNForceATA::getConfig( 0x65fee00, 0x663e560, 1 )
AppleNForceATA::selectConfig( 0x65fee00, 0x663e560, 1 )
AppleNForceATA::selectTimingParameter( 0x65fee00, 1 )
AppleNForceATA: selected PIO mode 4
AppleNForceATA: selected Ultra mode 2
AppleNForceATA: CH0 DRV0 wrote 0x90 to offset 0x5f
AppleNForceATA: CH0 DRV0 wrote 0x07 to offset 0x5f
AppleNForceATA: CH0 DRV0 wrote 0x80 to offset 0x5c
AppleNForceATA: CH0 DRV0 wrote 0x90 to offset 0x5b
AppleNForceATA: CH0 DRV0 wrote 0x07 to offset 0x5b
AppleNForceATA: CH0 DRV0 wrote 0x8b to offset 0x63
AppleNForceATA: CH0 DRV1 wrote 0x90 to offset 0x5f
AppleNForceATA: CH0 DRV1 wrote 0x07 to offset 0x5f
AppleNForceATA: CH0 DRV1 wrote 0x00 to offset 0x5c
AppleNForceATA: CH0 DRV1 wrote 0x20 to offset 0x5a
AppleNForceATA: CH0 DRV1 wrote 0x00 to offset 0x5a
AppleNForceATA: CH0 DRV1 wrote 0xc0 to offset 0x62
PCI_IDE_ENABLE 0x02
PCI_IDE_CONFIG 0x00
PCI_FIFO_CONFIG 0x00
PCI_ULTRA_TIMING 0x83c00000
[ Ch0 Drive0 ]
Command Active 300 ns
Command Recovery 240 ns
Address Setup 90 ns
Data Active 300 ns
Data Recovery 240 ns
[ Ch0 Drive1 ]
Command Active 300 ns
Command Recovery 240 ns
Address Setup 30 ns
Data Active 90 ns
Data Recovery 30 ns
UDMA Timing 0xc0
AppleNForceATA::getConfig( 0x65fee00, 0x663e560, 1 )
AppleNForceATA::provideBusInfo( 0x6625c00, 0x663e700 )
AppleNForceATA::getConfig( 0x6625c00, 0x6686ac0, 0 )
AppleNForceATA::selectConfig( 0x6625c00, 0x6686ac0, 0 )
AppleNForceATA::selectTimingParameter( 0x6625c00, 0 )
AppleNForceATA: selected PIO mode 4
AppleNForceATA: selected Ultra mode 6
PCI_IDE_ENABLE 0x0f
PCI_IDE_CONFIG 0x68
PCI_FIFO_CONFIG 0x80
PCI_ULTRA_TIMING 0x00000000
[ Ch0 Drive0 ]
Command Active 30 ns
Command Recovery 30 ns
Address Setup 30 ns
Data Active 30 ns
Data Recovery 30 ns
UDMA Timing 0x00
AppleNForceATA::getConfig( 0x6625c00, 0x6686ac0, 0 )
AppleNForceATA::getConfig( 0x65fee00, 0x663e440, 0 )
AppleNForceATA::selectConfig( 0x65fee00, 0x663e440, 0 )
AppleNForceATA::selectTimingParameter( 0x65fee00, 0 )
AppleNForceATA: selected PIO mode 4
AppleNForceATA: selected Ultra mode 2
AppleNForceATA: CH0 DRV0 wrote 0x20 to offset 0x5f
AppleNForceATA: CH0 DRV0 wrote 0x00 to offset 0x5f
AppleNForceATA: CH0 DRV0 wrote 0x00 to offset 0x5c
AppleNForceATA: CH0 DRV0 wrote 0x20 to offset 0x5b
AppleNForceATA: CH0 DRV0 wrote 0x00 to offset 0x5b
AppleNForceATA: CH0 DRV0 wrote 0xc0 to offset 0x63
AppleNForceATA: CH0 DRV1 wrote 0x20 to offset 0x5f
AppleNForceATA: CH0 DRV1 wrote 0x00 to offset 0x5f
AppleNForceATA: CH0 DRV1 wrote 0x00 to offset 0x5c
AppleNForceATA: CH0 DRV1 wrote 0x20 to offset 0x5a
AppleNForceATA: CH0 DRV1 wrote 0x00 to offset 0x5a
AppleNForceATA: CH0 DRV1 wrote 0xc0 to offset 0x62
PCI_IDE_ENABLE 0x02
PCI_IDE_CONFIG 0x00
PCI_FIFO_CONFIG 0x00
PCI_ULTRA_TIMING 0xc0c00000
[ Ch0 Drive0 ]
Command Active 90 ns
Command Recovery 30 ns
Address Setup 30 ns
Data Active 90 ns
Data Recovery 30 ns
UDMA Timing 0xc0
[ Ch0 Drive1 ]
Command Active 90 ns
Command Recovery 30 ns
Address Setup 30 ns
Data Active 90 ns
Data Recovery 30 ns
UDMA Timing 0xc0
AppleNForceATA::getConfig( 0x65fee00, 0x663e440, 0 )
AppleNForceATA: warning: phy connection failed. status=0x00000000
AppleNForceATA: warning: phy connection failed. status=0x00000000
AppleNForceATA: warning: phy connection failed. status=0x00000000
AppleNForceATA: warning: phy connection failed. status=0x00000000
AppleNForceATA: warning: phy connection failed. status=0x00000000
AppleNForceATA: found 0 units.
AppleNForceATA::free( 0x6600c00 )
AppleNForceATA: found 0 units.
AppleNForceATA::free( 0x6600e00 )
AppleNForceATA: found 0 units.
AppleNForceATA::free( 0x6600600 )
AppleNForceATA: found 0 units.
AppleNForceATA::free( 0x6600400 )
AppleNForceATA: found 0 units.
AppleNForceATA::free( 0x6625a00 )
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SAT1@D/AppleNForceATARoot/PRI0@0/AppleNForceATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/SAMSUNG HD160JJ SAMSUNG HD160JJ/IOGUIDPartitionScheme/Untitled@2
BSD root: disk0s2, major 14, minor 2
Jettisoning kernel linker.
Resetting IOCatalogue.
warning: skipping personalities in blacklisted kext com.apple.driver.AppleHWSensor
warning: skipping personalities in blacklisted kext com.apple.Dont_Steal_Mac_OS_X
display: family specific matching fails
Matching service count = 7
Matching service count = 8
Matching service count = 8
Matching service count = 8
Matching service count = 8
Matching service count = 8
NVDANV50HAL loaded and registered.
display: family specific matching fails
display: family specific matching fails
Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1
Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200
display: family specific matching fails
display: match category IOFramebuffer exists
nForceLAN: found nVidia MCP55 Ethernet Controller device 10de:0373 with flags 0x000935ff
nForceLAN: Version 0.62.8 starting
nForceLAN: found nForce LAN with MAC: 00:1B:FC:CB:3A:2F.
HDAEnabler: Copyright (c) 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SPAudio support:Taruga
nForceLAN: Ethernet address 00:1b:fc:cb:3a:2f
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPower Management) timed out
nForceLAN(en0): Link speed now 100Mbps(duplex = Full, flow control = Yes), code 0x10064.
AppleNForceATA: found 0 units.
AppleNForceATA::free( 0x65fec00 )
AppleNForceATA: start( 0x65fec00, 0x65d5000 )
AppleNForceATA::getBMBaseAddress( 0x65fec00, 1, 0x65fed1e )
AppleNForceATA: BMBaseAddr = fd08
AppleNForceATA::resetBusTimings( 0x65fec00 )
PCI_IDE_ENABLE 0x02
PCI_IDE_CONFIG 0x00
PCI_FIFO_CONFIG 0x00
PCI_ULTRA_TIMING 0xc0c00000
AppleNForceATA::configureTFPointers( 0x65fec00 )
AppleNForceATA: found 0 units.
AppleNForceATA::free( 0x65fec00 )
LSPCIUserClient: Client successfully started.
LSPCIUserClient: Client successfully closed
Bin im HT Bereich recht neu... Also bitte ab un zu mal in den Hintern treten damit ich weis was man meint... ;) MacBook Pro 15" late '08 ~ OS X 10.5.8 / Win 7 x64 Ultimate - 2x 2,4 Ghz - 4 GB Ram - 500 GB HDD
ASUS M2N32-SLI Deluxe | AMD 5600+ X2 | GF8600GT ~ OSx86 10.6.2 Retail - 2x 2,8 Ghz - 4 GB Ram - 320 GB
iPhone 3GS ~ v.4.2.1 Jailbreak- 32GB
Aktive Benutzer
Aktive Benutzer
Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1)
Ähnliche Themen
-
Meine Hardware: P5W DH Deluxe
Von lord_webi im Forum NonMobile HardwareAntworten: 80Letzter Beitrag: 01.07.2011, 23:24 -
Meine Game list
Von Lyrex im Forum PCAntworten: 3Letzter Beitrag: 24.11.2009, 15:02 -
Wo ist nur meine Festplatte hin?
Von Stefe Hobs im Forum AnwendungenAntworten: 0Letzter Beitrag: 27.09.2009, 17:42 -
Meine Erfahrungen
Von AndreasHL im Forum N00b - SandBoxAntworten: 9Letzter Beitrag: 15.11.2008, 20:01 -
Meine Lieblingsliste
Von AnnaOnWeb im Forum AnwendungenAntworten: 8Letzter Beitrag: 20.10.2008, 09:43


Zitieren
Das ganze bitte verstaendlich ausgedrueckt???